GS 350 RWD V6-3.5L (2GR-FSE) (2007)
B.
Install 3 NEW gaskets as shown in the illustration.
C.
Install a NEW gasket to the head cover.
D.
Install the head cover with the 14 bolts.
Torque:
Bolts A:
21 N.m (214 kgf.cm, 15 ft.lbf)
Bolts except A:
10 N.m (102 kgf.cm, 7 ft.lbf)
12.
Install the cylinder head cover LH.
A.
Apply FIPG sealant as shown in the illustration.
FIPG sealant: P/N 08826-00080 (or equivalent)
NOTE:
^
Remove any oil from the contact surface.
^
Install the head cover within 3 minutes after applying FIPG sealant.