GS 350 RWD V6-3.5L (2GR-FSE) (2007)
C.
Install the No. 1 chain tensioner assembly with the 2 bolts.
Torque: 10 N.m (102 kgf.cm, 7 ft.lbf)
D.
Remove the lock pin of the No. 1 chain tensioner assembly. Check that each timing mark is aligned with the crankshaft at the
TDC/compression.
E.
Turn the crankshaft 2 rotations and double-check that each timing mark is positioned properly.
8.
Install the NEW gasket and the timing chain cover plate with the 4 bolts.
Torque: 9 N.m (93 kgf.cm, 7 ft.lbf)