GS 350 RWD V6-3.5L (2GR-FSE) (2007)
C.
Apply a coat of engine oil to the pump activation cam and pump lifter part.
D.
Install the NEW fuel insulator to the cylinder head cover.
NOTE:
The open sides of the metal eyelets must be facing upward as shown in the illustration.
E.
Temporarily install the No. 2 fuel pipe sub-assembly to the fuel pump assembly.
NOTE
Be careful NOT to damage the sealing surface of the fuel pipe when temporarily installing the fuel pipe.
F.
Install the 2 studs.
Torque: 10 N.m (102 kgf.cm, 7 ft.lbf)
G.
Install the 2 nuts and tighten them in several passes.
Torque: 25 N.m (255 kgf.cm, 18 ft.lbf)
H.
Connect the fuel hose.
17.
Connect the No. 2 fuel pipe.