GS 350 RWD V6-3.5L (2GR-FSE) (2007)
/Page-889008.png)
a. Apply a light coat of gasoline to a new O-ring, and install a new O-ring and the fuel relief valve to the fuel filter.
4. INSTALL FLANGE ASSEMBLY
a. Apply a light coat of gasoline to a new O-ring, and install the O-ring to the flange. Then attach the 2 claws to install the flange to the fuel filter.
5. INSTALL FUEL PUMP ASSEMBLY
a. Install the fuel pump spacer to the fuel pump.
b. Apply a light coat of gasoline to a new seal, and install it to the fuel pump.
c. Attach the 2 claws to install the fuel pump to the fuel filter.
d. Connect the 2 connectors and terminal, and install the fuel pump wire.
6. INSTALL NO. 1 FUEL SUB-TANK
a. Apply gasoline to a new O-ring and install it to the jet pump.
