GS 350 RWD V6-3.5L (2GR-FSE) (2007)
b. Install the jet pump while aligning it to the installation position of the sub-tank.
c. Connect the jet pump nozzle to the sub-tank.
d. Attach the 3 claws to the claw holes and install the sub-tank.
e. Install a new E-ring.
7. INSTALL FUEL SENDER GAUGE ASSEMBLY
a. Set the fuel sender gauge to the sub-tank. Then slide the sender gauge downward to install it.
b. Connect the fuel sender gauge connector.
8. INSTALL FUEL SUCTION WITH PUMP AND GAUGE ASSEMBLY
a. Apply a light coat of gasoline to a new gasket, and install it to the fuel tank.
b. Connect the fuel return vent tube and set the fuel suction with pump and gauge assembly.