GS 350 RWD V6-3.5L (2GR-FSE) (2007)
^
Align positioning boss (A) of the blower assembly with the hole of the steering control ECU.
^
Securely engage the hook (B) of the steering control ECU with the blower assembly.
(b) Connect the 3 connectors to the steering control ECU.
2. INSTALL INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY NO.2
3. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL
4. PERFORM INITIALIZATION
Some systems need initialization when disconnecting the cable from the negative battery terminal.
5. PERFORM VARIABLE GEAR RATIO STEERING SYSTEM CALIBRATION