GS 350 RWD V6-3.5L (2GR-FSE) (2007)
f.
Loosen the pulley by turning SST (B) in the direction given in the illustration.
g. Remove the generator from SST.
h. Remove the clutch pulley from the rotor shaft.
2. REMOVE GENERATOR REAR END COVER
a. Place the generator on the clutch pulley.
b. Remove the 3 nuts and end cover.
3. REMOVE TERMINAL INSULATOR
a. Remove the terminal insulator from the generator coil.
4. REMOVE GENERATOR BRUSH HOLDER ASSEMBLY