GS 350 RWD V6-3.5L (2GR-FSE) (2007)
/Page-1226001.png)
Alternator: Overhaul
DISASSEMBLY
1. REMOVE CLUTCH PULLEY
a. Using a screwdriver, remove the generator pulley cap.
b. Set SST (A) and (B).
SST 09820-63020
c. Clamp SST (A) in a vise.
d. Place the rotor shaft end into SST (A).
e. Fit SST (B) to the clutch pulley.
