GS 350 RWD V6-3.5L (2GR-FSE) (2007)
Starter Motor: Overhaul
DISASSEMBLY
1. REMOVE REPAIR SERVICE STARTER KIT
a. Remove the nut, and disconnect the lead wire from the repair service starter kit.
b. Remove the 2 screws holding the repair service starter kit.
c. Remove the repair service starter kit.
d. Remove the return spring and plunger.
2. REMOVE STARTER YOKE ASSEMBLY
a. Remove the 2 through bolts, and pull out the starter yoke and commutator end frame together.
b. Remove the starter yoke from the commutator end frame.