GS 350 RWD V6-3.5L (2GR-FSE) (2007)
(c)
Align the groove of the manual valve with the pin of the lever.
(d) Install the 20 bolts.
Torque: 11 N*m (112 kgf*cm, 8 ft.*lbf)
Bolt length:
36 mm (1.42 in.) for bolt A
25 mm (0.98 in.) for bolt B
45 mm (1.77 in.) for bolt C
50 mm (1.97 in.) for bolt D
2. CONNECT TRANSMISSION WIRE
3. INSTALL VALVE BODY OIL STRAINER ASSEMBLY
4. INSTALL AUTOMATIC TRANSMISSION OIL PAN SUB-ASSEMBLY
5. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL
6. ADD AUTOMATIC TRANSMISSION FLUID
(a)
Add automatic transmission fluid.
7. INSTALL NO. 2 ENGINE UNDER COVER
8. PERFORM RESET MEMORY
(a)
Perform the RESET MEMORY procedures (A/T initialization).
9. PERFORM INITIALIZATION
(a)
Perform initialization.
NOTICE: Certain systems need to be initialized after disconnecting and reconnecting the cable from the negative (-) battery terminal.