GS 400 V8-4.0L (1UZ-FE) (1999)
o. Rear console armrest
p. Console box register
q. Console box
r.
No.3 console box mounting bracket
s. No.1 console box duct
2. REMOVE AIRBAG SENSOR ASSEMBLY
a. Disconnect the airbag sensor connectors.
NOTE: Remove the connectors with the sensor assembly installed.
b. Using a torx wrench, remove the 3 screws and airbag sensor assembly.
Torx wrench: T40 (Part No.09042-00020 or locally manufactured tool)
Installation
NOTE:
-
Never use SRS parts from another vehicle. When replacing parts, replace them with new parts.
-
Never reuse the airbag sensor assembly involved in a collision when the airbag has deployed.
-
Never repair a sensor in order to reuse it.