GS 400 V8-4.0L (1UZ-FE) (1999)
Air Bag Control Module: Service and Repair
Airbag Sensor Assembly
Replacement Requirements
REPLACEMENT REQUIREMENTS
In the following cases, replace the airbag sensor assembly.
-
If the SRS has been deployed in a collision.
-
If the airbag sensor assembly has been found to be faulty in troubleshooting.
-
If the airbag sensor assembly has been dropped.
CAUTION: Be sure to follow the correct procedure for removal and installation of the airbag sensor assembly.
Removal
NOTE: Do not open the cover or the case of the ECU and various computers unless absolutely necessary.
(If the IC terminals are touched, the IC may be destroyed by static electricity.)