GS 400 V8-4.0L (1UZ-FE) (1999)
b. Connect the 7 connectors to the solenoid valves.
c. Install the clamp with the bolt.
Torque: 6.4 Nm (65 kgf-cm, 56 inch lbs.)
d. Connect the ATF temperature sensor.
7. INSTALL OIL STRAINER
a. Install 3 new gaskets.
b. Install the oil strainer with the 4 bolts.
Torque: 10 Nm (100 kgf-cm, 7 ft. lbs.)
8. INSTALL OIL PAN
a. Install the 3 magnets in the indications of the oil pan.
b. Remove any packing material and be careful not to drop oil on the contacting surfaces of the transmission case and oil pan.
c. Apply FIPG to the oil pan.
FIPG: Part No. 08826-00090, THREE BOND 1281 or equivalent