GS 400 V8-4.0L (1UZ-FE) (1999)
a. Remove the 4 bolts and oil strainer.
b. Remove the 3 gaskets from the oil strainer.
5. REMOVE SOLENOID WIRING WITH ATF TEMPERATURE SENSOR
a. Disconnect the ATF temperature sensor.
b. Remove the bolt and clamp.
c. Disconnect the 7 connectors from the solenoid valves.
d. Remove the bolt and pull out the solenoid connector.
6. INSTALL SOLENOID WIRING WITH ATF TEMPERATURE SENSOR
a. Install the solenoid connector with the bolt.
Torque: 5.4 Nm (55 kgf-cm, 48 inch lbs.)