GX 470 V8-4.7L (2UZ-FE) (2004)
HINT: If an area other than that specified is coated by accident, wipe off the primer with a clean shop rag before it dries.
NOTE:
-
Allow the primer coating to dry for 3 minutes or more.
-
Do not keep any of the opened Primer G for later use.
e. Apply adhesive.
Adhesive: Part No. 08850-00801 or equivalent
1. Cut off the tip of the cartridge nozzle, as shown in the illustration.
HINT: After cutting off the tip, use all adhesive within the time described in the table.
Tackfree time:
2. Load the sealer gun with the cartridge.
3. Coat the glass with adhesive, as shown in the illustration.
Dimensions:
f.
Install the glass.