GX 470 V8-4.7L (2UZ-FE) (2004)
1. Using a suction cup, position the glass so that the reference marks are aligned, and press it in gently along the rim.
NOTE:
-
Allow the primer coating to dry for 3 minutes or more.
-
Check that the stoppers are attached to the body correctly.
-
Check the clearance between the body and glass.
2. Lightly press the front surface of the glass to ensure a close fit.
3. Using a scraper, remove any excess or protruding adhesive
HINT: Apply adhesive onto the glass rim.
NOTE: Take care not to drive the vehicle for the time described in the table.
Minimum time: