HS 250h L4-2.4L (2AZ-FXE) Hybrid (2010)
Wheel Speed Sensor: Service and Repair
Rear Speed Sensor
Components
BRAKE CONTROL / DYNAMIC CONTROL SYSTEMS: REAR SPEED SENSOR: COMPONENTS
Removal
BRAKE CONTROL / DYNAMIC CONTROL SYSTEMS: REAR SPEED SENSOR: REMOVAL
NOTICE:
*
While the battery is connected, even if the power switch is off, the brake control system activates when the brake pedal is
depressed or any door courtesy switch is turned on. Therefore, when servicing the brake system components, do not depress the
brake pedal or open/close the doors while the battery is connected.
*
When the brake pedal is first depressed after replacing the brake pads or pushing back the disc brake piston, DTC C1214 may be
output. As there is no malfunction, clear the DTC.
HINT
*
Use the same procedure for the LH side and RH side.
*
The following procedure is for the LH side.
*
If the sensor rotor needs to be replaced, replace it together with the rear axle hub and bearing assembly.
*
The rear speed sensor is a component of the rear axle hub and bearing assembly. If the rear speed sensor malfunctions, replace the