HS 250h L4-2.4L (2AZ-FXE) Hybrid (2010)
(b) Measure the resistance according to the value(s) in the table below.
Standard Resistance:
Result:
C -- CHECK FOR SHORT TO GND IN CAN BUS WIRE (ECU, SENSOR)
B -- REPAIR OR REPLACE CAN BUS MAIN WIRE OR CONNECTOR (CAN NO. 1 J/C - CAN J/C LH)
A -- Continue to next step.
4. CHECK SHORT TO GND IN CAN BUS WIRE (CAN J/C LH)
(a) Disconnect the engine room main wire from the CAN junction connector LH.
Text in Illustration
(b) Measure the resistance according to the value(s) in the table below.
Standard Resistance: