HS 250h L4-2.4L (2AZ-FXE) Hybrid (2010)
(b) Measure the resistance according to the value(s) in the table below.
Standard Resistance:
Result:
C -- CHECK FOR SHORT TO GND IN CAN BUS WIRE (ECU, SENSOR)
B -- CHECK SHORT TO GND IN CAN BUS WIRE (CAN J/C RH)
A -- REPLACE CAN NO. 1 JUNCTION CONNECTOR
3. CHECK FOR SHORT TO GND IN CAN BUS WIRE (CAN J/C LH)
(a) Disconnect the instrument panel wire from the CAN junction connector LH.
Text in Illustration