IS 250 RWD V6-2.5L (4GR-FSE) (2007)
/Page-1149003.png)
16. REMOVE BRAKE ACTUATOR BOLT CUSHION
a. Remove the 2 bolts and the 2 brake actuator bolt cushions from the brake actuator assembly.
INSTALLATION
1. INSTALL BRAKE ACTUATOR BOLT CUSHION
a. Install the 2 brake actuator bolt cushions and 2 bolts to the brake actuator assembly.
2. INSTALL BRAKE ACTUATOR BRACKET ASSEMBLY
a. Install the brake actuator bolt cushion with the actuator bracket assembly.
b. Install the brake actuator to the actuator bracket assembly with the 2 nuts.
Torque:5.4 N.m (55 kgf.cm, 48 in.lbf)
