IS 250 RWD V6-2.5L (4GR-FSE) (2007)
/Page-1149002.png)
-
6: From Rear Master Cylinder
d. Using SST, disconnect the No. 3 front brake tube from the flexible hose.SST 09023-00101
e. Separate the grommet and remove the No. 3 front brake tube.
NOTE: Do not damage the brake tube.
f.
Remove the 2 bolts, nut and brake actuator assembly with bracket from the body.
NOTE: Do not damage the brake tubes.
15. REMOVE BRAKE ACTUATOR BRACKET ASSEMBLY
a. Remove the 2 nuts and the brake actuator from the actuator bracket assembly.
b. Remove the brake actuator bolt cushion and actuator bracket.