IS 250 RWD V6-2.5L (4GR-FSE) (2007)
17. REMOVE COOLER CONDENSER ASSEMBLY
a. Remove the 4 bolts and cooler condenser assembly.
18. REMOVE COOLER DRYER
a. Using a straight hexagon wrench 14 mm, remove the cap from the modulator.
b. Using pliers, remove the cooler dryer.
INSTALLATION
1. INSTALL COOLER DRYER
a. Using pliers, install the cooler dryer to the modulator.
b. Sufficiently apply compressor oil to an O-ring and cap fitting surface.
Compressor oil: ND-OIL 8 or equivalent