IS 250C V6-2.5L (4GR-FSE) (2011)
Use the same procedure for the RH side and LH side.
(g) Disengage the 4 claws and remove the rear bumper assembly as shown in the illustration.
(h) w/ Intuitive Parking Assist System:
(1) Disengage the clamp and remove the grommet.
Installation
EXTERIOR PANELS / TRIM: REAR BUMPER: INSTALLATION
1. INSTALL REAR BUMPER ASSEMBLY
(a) w/ Intuitive Parking Assist System:
(1) Engage the clamp and install the grommet.
(b) Engage the 4 claws and install the rear bumper assembly as shown in the illustration.
(c) Engage the 6 claws and connect the rear bumper assembly as shown in the illustration.