IS 250C V6-2.5L (4GR-FSE) (2011)
The final torque must be applied under standard vehicle height conditions.
3. INSTALL FRONT LOWER SUSPENSION ARM ASSEMBLY RH
HINT
Perform the same procedure as the LH side.
4. INSTALL FRONT STABILIZER BAR
(a) Install the front stabilizer bar with the 2 nuts.
Torque : 84 Nm (857 kgf-cm, 62 ft-lbf)
HINT
If the ball joint turns together with the nut, use a hexagon wrench (6 mm) to hold the stud bolt.
5. INSTALL FRONT ENGINE MOUNTING INSULATOR LH (for 4GR-FSE) See: Engine, Cooling and Exhaust/Engine/Service and
Repair/Removal and Replacement/Engine Assembly/Installation
6. INSTALL FRONT ENGINE MOUNTING INSULATOR LH (for 2GR-FSE) See: Engine, Cooling and Exhaust/Engine/Service and
Repair/Removal and Replacement/Engine Assembly/Installation
7. INSTALL FRONT ENGINE MOUNTING INSULATOR RH (for 4GR-FSE) See: Engine, Cooling and Exhaust/Engine/Service and
Repair/Removal and Replacement/Engine Assembly/Installation
8. INSTALL FRONT ENGINE MOUNTING INSULATOR RH (for 2GR-FSE) See: Engine, Cooling and Exhaust/Engine/Service and
Repair/Removal and Replacement/Engine Assembly/Installation
9. INSTALL FRONT SUSPENSION CROSSMEMBER SUB-ASSEMBLY (for 4GR-FSE) See: Engine, Cooling and Exhaust/Engine/Service and
Repair/Removal and Replacement/Engine Assembly/Installation
10. INSTALL FRONT SUSPENSION CROSSMEMBER SUB-ASSEMBLY (for 2GR-FSE) See: Engine, Cooling and Exhaust/Engine/Service and
Repair/Removal and Replacement/Engine Assembly/Installation
11. INSTALL ENGINE UNDER COVER SUB-ASSEMBLY LH (for 4GR-FSE) See: Engine, Cooling and Exhaust/Engine/Service and
Repair/Removal and Replacement/Engine Assembly/Installation
12. INSTALL ENGINE UNDER COVER SUB-ASSEMBLY LH (for 2GR-FSE) See: Engine, Cooling and Exhaust/Engine/Service and
Repair/Removal and Replacement/Engine Assembly/Installation
13. INSTALL ENGINE UNDER COVER SUB-ASSEMBLY RH (for 4GR-FSE) See: Engine, Cooling and Exhaust/Engine/Service and
Repair/Removal and Replacement/Engine Assembly/Installation
14. INSTALL ENGINE UNDER COVER SUB-ASSEMBLY RH (for 2GR-FSE) See: Engine, Cooling and Exhaust/Engine/Service and
Repair/Removal and Replacement/Engine Assembly/Installation
15. INSTALL ENGINE AND TRANSMISSION ASSEMBLY
HINT
Refer to the procedure from Install Engine with Transmission Assembly.
for 4GR-FSE See: Engine, Cooling and Exhaust/Engine/Service and Repair/Removal and Replacement/Engine Assembly/Installation
for 2GR-FSE See: Engine, Cooling and Exhaust/Engine/Service and Repair/Removal and Replacement/Engine Assembly/Installation