IS 250C V6-2.5L (4GR-FSE) (2011)
1. INSTALL BRAKE PEDAL SUPPORT ASSEMBLY
(a) Install the brake pedal support assembly with the bolt.
Torque : 21 Nm (206 kgf-cm, 15 ft-lbf)
(b) Connect the connector and engage the clamp.
2. TEMPORARILY TIGHTEN STOP LIGHT SWITCH ASSEMBLY
HINT
Completely install the stop light switch assembly after adjusting the brake pedal.
3. INSTALL BRAKE BOOSTER ASSEMBLY
HINT
Refer to the instructions for Installation of the brake booster assembly See: Power Brake Assist/Vacuum Brake Booster/Service and
Repair/Installation.