IS 250C V6-2.5L (4GR-FSE) (2011)
Brake Pedal Assy: Removal and Replacement
Components
BRAKE SYSTEM (OTHER): BRAKE PEDAL: COMPONENTS
Removal
BRAKE SYSTEM (OTHER): BRAKE PEDAL: REMOVAL
1. REMOVE BRAKE BOOSTER ASSEMBLY
HINT
Refer to the instructions for Removal of the brake booster assembly See: Power Brake Assist/Vacuum Brake Booster/Service and
Repair/Removal.
2. REMOVE STOP LIGHT SWITCH ASSEMBLY See: Lighting and Horns/Brake Light Switch/Service and Repair/Removal
3. REMOVE BRAKE PEDAL SUPPORT ASSEMBLY
(a) Disconnect the connector and disengage the clamp.
(b) Remove the bolt and brake pedal support assembly from the body.
Installation
BRAKE SYSTEM (OTHER): BRAKE PEDAL: INSTALLATION