IS 250C V6-2.5L (4GR-FSE) (2011)
Installation
PARKING BRAKE: PARKING BRAKE LEVER (for Manual Transmission): INSTALLATION
1. INSTALL PARKING BRAKE LEVER SUB-ASSEMBLY
(a) Install the No. 1 parking brake cable assembly through the floor hole and tighten the 2 bolts.
Torque : 8.0 Nm (82 kgf-cm, 71 in-lbf)
(b) Install the parking brake lever sub-assembly with the 2 bolts.
Torque : 39 Nm (400 kgf-cm, 29 ft-lbf)
(c) Connect the parking brake switch connector.
2. INSTALL PARKING BRAKE EQUALIZER
(a) Install the parking brake equalizer to the No. 1 parking brake cable assembly in the order as shown in the illustration.