IS 250C V6-2.5L (4GR-FSE) (2011)
SST : 09330-00021
(b) Remove the 8 bolts, front spacer, drive plate and rear spacer.
5. REMOVE REAR ENGINE OIL SEAL
(a) Using a knife, cut through the oil seal lip.
Text in Illustration
(b) Using a screwdriver with its tip taped, pry out the oil seal.
NOTICE:
After removal, check the crankshaft for damage. If it is damaged, smooth the surface with 400-grit sandpaper.
HINT
Tape the screwdriver tip before use.