IS 250C V6-2.5L (4GR-FSE) (2011)
Fuel Pressure Regulator: Service and Repair
Removal
4GR-FSE FUEL: FUEL PRESSURE REGULATOR: REMOVAL
1. REMOVE FUEL SUCTION TUBE ASSEMBLY WITH PUMP AND GAUGE
(a) Remove the fuel suction tube assembly with pump and gauge See: Fuel Pump/Service and Repair/Removal and Replacement/Fuel
Pump/Removal.
2. REMOVE FUEL SENDER GAUGE See: Fuel Tank/Fuel Gauge Sender/Service and Repair/Removal
3. REMOVE NO. 1 FUEL SUB-TANK
(a) Using needle nozzle pliers, remove the E-ring.
Text in Illustration
(b) Using a screwdriver with the tip taped, disengage the claw and remove the jet pump nozzle.
Text in Illustration
(c) Using a screwdriver with the tip taped, disengage the 3 claws and remove the No. 1 fuel sub-tank.
Text in Illustration
(d) Using a clip remover with the tip taped, remove the jet pump from the No. 1 fuel sub-tank.
Text in Illustration