IS 250C V6-2.5L (4GR-FSE) (2011)
NOTICE:
The O-ring is installed firmly between the jet pump and No. 1 fuel sub-tank. Therefore, the jet pump and No. 1 fuel sub-tank should
be removed carefully using a clip remover.
4. REMOVE FUEL PUMP
(a) Disconnect the 2 connectors and terminal, and remove the fuel pump wire.
(b) Using a screwdriver with the tip taped, detach the 2 claws from the claw holes and remove the fuel pump.
Text in Illustration
(c) Remove the fuel pump seal from the fuel pump.
Text in Illustration
NOTICE:
If the fuel pump seal still remains in the fuel filter, remove it using a wire tip (1 mm diameter) that is formed as shown in the
illustration. Be careful not to damage the sealing surface.
5. REMOVE FLANGE ASSEMBLY
(a) Using a screwdriver with the tip taped, disengage the 2 claws and remove the flange assembly.