IS 250C V6-2.5L (4GR-FSE) (2011)
Entertainment System Control Module: Service and Repair
Removal
AUDIO / VIDEO: MULTI-MEDIA INTERFACE ECU: REMOVAL
1. REMOVE DOOR SCUFF PLATE ASSEMBLY
HINT
Use the same procedure for the RH side and LH side See: Body and Frame/Interior Moulding / Trim/Headliner/Service and
Repair/Removal and Replacement/Roof Headlining (for Front Side)/Removal.
2. REMOVE FRONT DOOR OPENING TRIM COVER
HINT
Use the same procedure for the RH side and LH side See: Body and Frame/Interior Moulding / Trim/Headliner/Service and
Repair/Removal and Replacement/Roof Headlining (for Front Side)/Removal.
3. REMOVE INSTRUMENT SIDE PANEL See: Body and Frame/Interior Moulding / Trim/Dashboard / Instrument Panel/Service and
Repair/Removal and Replacement/Removal
4. REMOVE NO. 2 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY See: Body and Frame/Interior Moulding / Trim/Dashboard /
Instrument Panel/Service and Repair/Removal and Replacement/Removal
5. REMOVE MULTI-MEDIA INTERFACE ECU WITH BRACKET
(a) Disconnect each connector.
(b) Remove the 2 screws and multi-media interface ECU with bracket.
6. REMOVE NO. 1 MULTI-MEDIA INTERFACE BRACKET
(a) Remove the 2 screws and No. 1 multi-media interface bracket.
7. REMOVE NO. 2 MULTI-MEDIA INTERFACE BRACKET
(a) Remove the 2 screws and No. 2 multi-media interface bracket.
8. REMOVE MULTI-MEDIA INTERFACE ECU