IS 250C V6-2.5L (4GR-FSE) (2011)
Entertainment System Control Module: Service and Repair
Installation
AUDIO / VIDEO: MULTI-MEDIA INTERFACE ECU: INSTALLATION
1. INSTALL MULTI-MEDIA INTERFACE ECU
2. INSTALL NO. 1 MULTI-MEDIA INTERFACE BRACKET
(a) Install the No. 1 multi-media interface bracket with the 2 screws.
3. INSTALL NO. 2 MULTI-MEDIA INTERFACE BRACKET
(a) Install the No. 2 multi-media interface bracket with the 2 screws.
4. INSTALL MULTI-MEDIA INTERFACE ECU WITH BRACKET
(a) Install the multi-media interface ECU with bracket with the 2 screws.
(b) Connect each connector.
5. INSTALL NO. 2 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY See: Body and Frame/Interior Moulding / Trim/Dashboard /
Instrument Panel/Service and Repair/Removal and Replacement/Installation
6. INSTALL INSTRUMENT SIDE PANEL See: Body and Frame/Interior Moulding / Trim/Dashboard / Instrument Panel/Service and
Repair/Removal and Replacement/Installation
7. INSTALL FRONT DOOR OPENING TRIM COVER
HINT
Use the same procedure for the RH side and LH side See: Body and Frame/Interior Moulding / Trim/Headliner/Service and
Repair/Removal and Replacement/Roof Headlining (for Front Side)/Installation.
8. INSTALL DOOR SCUFF PLATE ASSEMBLY
HINT
Use the same procedure for the RH side and LH side See: Body and Frame/Interior Moulding / Trim/Headliner/Service and
Repair/Removal and Replacement/Roof Headlining (for Front Side)/Installation.