IS 250C V6-2.5L (4GR-FSE) (2011)
Assembly/Installation
10. INSTALL REAR INNER SEAT TRACK BRACKET COVER See: Body and Frame/Seats/Service and Repair/Removal and Replacement/Front
Seat Assembly/Installation
11. INSTALL REAR OUTER SEAT TRACK BRACKET COVER See: Body and Frame/Seats/Service and Repair/Removal and Replacement/Front
Seat Assembly/Installation
12. INSTALL FRONT INNER SEAT TRACK BRACKET COVER See: Body and Frame/Seats/Service and Repair/Removal and
Replacement/Front Seat Assembly/Installation
13. INSTALL FRONT OUTER SEAT TRACK BRACKET COVER See: Body and Frame/Seats/Service and Repair/Removal and
Replacement/Front Seat Assembly/Installation
14. INSTALL FRONT SEAT HEADREST ASSEMBLY
15. REGISTRATION
HINT
If the position control ECU and switch assembly has been replaced, register the end-point positions of the reclining motor, lifter motor
and slide motor See: Body and Frame/Seats/Testing and Inspection/Initial Inspection and Diagnostic Overview/Front Power Seat
Control System (w/ Memory)/Operation Check.
16. INSPECT SRS WARNING LIGHT
HINT
Inspect the SRS warning light See: Restraint Systems/Air Bag Systems/Testing and Inspection/Initial Inspection and Diagnostic
Overview/Diagnosis System.
17. INSPECT FRONT SEAT ASSEMBLY See: Body and Frame/Seats/Service and Repair/Removal and Replacement/Front Seat
Assembly/Installation