IS 250C V6-2.5L (4GR-FSE) (2011)
Installation
SEAT: POWER SEAT SWITCH: INSTALLATION
1. INSTALL POWER SEAT SHOULDER SWITCH ASSEMBLY (w/ Memory)
(a) Engage the 4 claws to install the power seat shoulder switch assembly.
2. INSTALL FRONT SHOULDER BELT HANGER CAP See: Body and Frame/Seats/Service and Repair/Overhaul/Front Seat
Assembly/Reassembly
3. INSTALL POSITION CONTROL ECU AND SWITCH ASSEMBLY (w/ Memory)
NOTICE:
When replacing the position control ECU and switch assembly, register the end-point positions of the reclining motor, lifter motor
and slide motor.
(a) Connect the 2 connectors.
(b) Install the position control ECU and switch assembly with the 3 screws.
4. INSTALL FRONT POWER SEAT SWITCH (w/o Memory)
(a) Connect the connector.
(b) Install the front power seat switch with the 3 screws.
5. INSTALL FRONT SEAT CUSHION SHIELD ASSEMBLY See: Body and Frame/Seats/Service and Repair/Overhaul/Front Seat
Assembly/Reassembly
6. INSTALL RECLINING ADJUSTER RELEASE HANDLE See: Body and Frame/Seats/Service and Repair/Overhaul/Front Seat
Assembly/Reassembly
7. INSTALL RECLINING POWER SEAT SWITCH KNOB See: Body and Frame/Seats/Service and Repair/Overhaul/Front Seat
Assembly/Reassembly
8. INSTALL SLIDE AND VERTICAL POWER SEAT SWITCH KNOB See: Body and Frame/Seats/Service and Repair/Overhaul/Front Seat
Assembly/Reassembly
9. INSTALL FRONT SEAT ASSEMBLY See: Body and Frame/Seats/Service and Repair/Removal and Replacement/Front Seat