IS 250C V6-2.5L (4GR-FSE) (2011)
1. REMOVE FRONT SEAT HEADREST ASSEMBLY
2. REMOVE FRONT OUTER SEAT TRACK BRACKET COVER See: Body and Frame/Seats/Service and Repair/Removal and
Replacement/Front Seat Assembly/Removal
3. REMOVE FRONT INNER SEAT TRACK BRACKET COVER See: Body and Frame/Seats/Service and Repair/Removal and
Replacement/Front Seat Assembly/Removal
4. REMOVE REAR OUTER SEAT TRACK BRACKET COVER See: Body and Frame/Seats/Service and Repair/Removal and Replacement/Front
Seat Assembly/Removal
5. REMOVE REAR INNER SEAT TRACK BRACKET COVER See: Body and Frame/Seats/Service and Repair/Removal and Replacement/Front
Seat Assembly/Removal
6. REMOVE FRONT SEAT ASSEMBLY See: Body and Frame/Seats/Service and Repair/Removal and Replacement/Front Seat
Assembly/Removal
7. REMOVE SLIDE AND VERTICAL POWER SEAT SWITCH KNOB See: Body and Frame/Seats/Service and Repair/Overhaul/Front Seat
Assembly/Disassembly
8. REMOVE RECLINING POWER SEAT SWITCH KNOB See: Body and Frame/Seats/Service and Repair/Overhaul/Front Seat
Assembly/Disassembly
9. REMOVE RECLINING ADJUSTER RELEASE HANDLE See: Body and Frame/Seats/Service and Repair/Overhaul/Front Seat
Assembly/Disassembly
10. REMOVE FRONT SEAT CUSHION SHIELD ASSEMBLY See: Body and Frame/Seats/Service and Repair/Overhaul/Front Seat
Assembly/Disassembly
11. REMOVE FRONT POWER SEAT SWITCH (w/o Memory)
(a) Disconnect the connector.
(b) Remove the 3 screws and the front power seat switch.
12. REMOVE POSITION CONTROL ECU AND SWITCH ASSEMBLY (w/ Memory)
NOTICE:
When replacing the position control ECU and switch assembly, register the end-point positions of the reclining motor, lifter motor
and slide motor.
(a) Disconnect the 2 connectors.
(b) Remove the 3 screws and the position control ECU and switch assembly.
13. REMOVE FRONT SHOULDER BELT HANGER CAP See: Body and Frame/Seats/Service and Repair/Overhaul/Front Seat
Assembly/Disassembly
14. REMOVE POWER SEAT SHOULDER SWITCH ASSEMBLY (w/ Memory)
(a) Disengage the 4 claws and remove the power seat shoulder switch assembly.