IS 250C V6-2.5L (4GR-FSE) (2011)
Neutral Safety Switch: Adjustments
A960E Automatic Transmission
A960E AUTOMATIC TRANSMISSION / TRANSAXLE: PARK / NEUTRAL POSITION SWITCH: ADJUSTMENT
1. ADJUST PARK/NEUTRAL POSITION SWITCH ASSEMBLY
(a) Loosen the bolt of the park/neutral position switch and move the shift lever to N.
(b) Align the groove and the neutral alignment mark.
Text in Illustration
(c) Hold the switch in position and tighten the bolt.
Torque : 13 Nm (130 kgf-cm, 9 ft-lbf)
(d) After adjustment, perform the inspection See: Testing and Inspection/A960E Automatic Transmission/On-Vehicle Inspection.