IS 250C V6-2.5L (4GR-FSE) (2011)
Neutral Safety Switch: Service and Repair
A760E Automatic Transmission
Components
A760E AUTOMATIC TRANSMISSION / TRANSAXLE: PARK / NEUTRAL POSITION SWITCH: COMPONENTS
Removal
A760E AUTOMATIC TRANSMISSION / TRANSAXLE: PARK / NEUTRAL POSITION SWITCH: REMOVAL
1. SEPARATE FLOOR SHIFT GEAR SHIFTING ROD SUB-ASSEMBLY See: Transmission and Drivetrain/Automatic
Transmission/Transaxle/Shifter A/T/Service and Repair/Removal and Replacement/A760E Automatic Transmission/Shift Lever
Assembly/Removal
2. REMOVE PARK/NEUTRAL POSITION SWITCH ASSEMBLY
(a) Disconnect the park/neutral position switch connector.
Text in Illustration
(b) Remove the nut, spring washer and transmission control shaft lever RH.
(c) Using a screwdriver, pry out the lock washer.