IS 250C V6-2.5L (4GR-FSE) (2011)
Torque : 6.9 Nm (70 kgf-cm, 61 in-lbf)
(d) Temporarily install the control shaft lever.
(e) Turn the control shaft lever counterclockwise until it stops, and turn it clockwise 2 notches to set it to the neutral position.
Text in Illustration
(f) Remove the transmission control shaft lever.
(g) Align the neutral alignment mark line with the switch groove, and tighten the adjusting bolt.
Text in Illustration
Torque : 13 Nm (133 kgf-cm, 9 ft-lbf)
(h) Using a screwdriver, bend the tabs of the lock washer.