IS 250C V6-2.5L (4GR-FSE) (2011)
09961-02060
(d) Using SST, remove the steering knuckle from the upper suspension arm as shown in the illustration.
Text in Illustration
SST : 09960-20010
09961-02010
09961-02060
09961-02060
CAUTION:
Apply grease to the end and threads of the SST bolt.
NOTICE:
*
Install SST so that A and B are parallel.
*
Be sure to place a wrench on the part indicated in the illustration.
*
Make sure that SST is securely positioned on the steering knuckle spacer.
*
Be careful not to damage the steering knuckle because it is made of aluminum and may be damaged easily.
*
Do not damage the ball joint dust cover.
*
Be sure to tighten the string firmly to secure SST to the front upper suspension arm to prevent SST from falling off.
HINT
Apply protective tape to the steering knuckle.
If the steering knuckle spacer has come off, replace the steering knuckle with a new one.