IS 250C V6-2.5L (4GR-FSE) (2011)
Tape the screwdriver tip before use.
(b) Using a screwdriver, separate the No. 1 windshield wiper link rod from the pivot of the front wiper link assembly as shown in the illustration.
Text in Illustration
HINT
Tape the screwdriver tip before use.
(c) Position the No. 1 windshield wiper link rod as shown in the illustration. Using a screwdriver, remove the No. 1 windshield wiper link rod.
Text in Illustration
HINT
Tape the screwdriver tip before use.
(d) Using a T30 "TORX" socket wrench, remove the 2 bolts and 2 nuts and the windshield wiper motor assembly from the wind shield wiper link
assembly.