IS 250C V6-2.5L (4GR-FSE) (2011)
Wiper Motor: Service and Repair
Installation
WIPER / WASHER: FRONT WIPER MOTOR: INSTALLATION
1. INSTALL WINDSHIELD WIPER MOTOR ASSEMBLY
(a) Using a T30 "TORX" socket wrench, install the windshield wiper motor assembly with the 2 bolts and 2 nuts.
Torque : 7.5 Nm (77 kgf-cm, 66 in-lbf)
(b) Apply MP grease to the crank arm pivot of the windshield wiper motor assembly.
(c) Install the No. 1 windshield wiper link rod to the crank arm pivot of the windshield wiper motor assembly as shown in the illustration.
(d) Apply MP grease to the pivot of the windshield wiper link assembly.
(e) Install the No. 1 windshield wiper link rod to the pivot of the windshield wiper link assembly as shown in the illustration.
(f) Install the No. 2 windshield wiper link rod to the crank arm pivot of the windshield wiper motor assembly as shown in the illustration.
2. INSTALL WINDSHIELD WIPER MOTOR AND LINK ASSEMBLY
(a) Engage the rubber pin to install the windshield wiper motor and link assembly as shown in the illustration.