LS 430 V8-4.3L (3UZ-FE) (2002)
/Page-968011.png)
1. Hook up the LEXUS hand-held tester to the DLC3.
2. Turn the ignition switch ON.
3. Read the DTC by following the prompts on the tester screen
HINT: Please refer to the LEXUS hand-held tester operator's manual for further details.
c. Clear the DTC.
1. Hook up the LEXUS hand-held tester to the DLC3
2. Turn the ignition switch ON.
3. Operate the LEXUS hand-held tester to erase the codes.
HINT: Please refer to the LEXUS hand-held tester operator's manual for further details.
