LS 460 V8-4.6L (1UR-FSE) (2007)
9. ADJUST CAMBER
(a)
If the front suspension crossmember's left to right camber value is not as specified even though the camber and caster adjustment was
performed, replace the upper arm bracket No. 1 and No. 2. Then perform the camber adjustment again.
Standard
HINT: For +2 mm parts, the upper arm installation hole is further toward the outside of the vehicle compared to standard parts.
10. INSPECT FRONT SUSPENSION
(a)
Inspect the front suspension member.
(1) Measure the dimension between the center of the installation bolts of the front No. 2 suspension lower arm.
Standard length: 788 mm (31.02 in.)
If the result is not within the specification, replace the front suspension member.