LS 460 V8-4.6L (1UR-FSE) (2007)
(b) Inspect the front No. 1 suspension lower arm.
(1) Remove the front No. 1 suspension lower arm.
(2) Measure the dimension between the center of the front No. 1 suspension lower arm bush and the ball joint stud.
Standard length: 385.5 mm (15.177 in.)
HINT: If the dimension of the front suspension lower arm changes 2 mm (0.079 in.), the camber will change approximately 15' (0.25°
).
(c)
Inspect the front No. 2 suspension lower arm.
(1) Remove the front No. 2 suspension lower arm.
(2) Measure the dimension between the center of the front suspension lower arm bush and position A.
Standard length: 315.6 mm (12.425 in.)
HINT: If the dimension of the front suspension lower arm changes 2 mm (0.079 in.), the camber will change approximately 15' (0.25°
).
(d) Inspect the front No. 1 suspension upper arm.
(1) Remove the front No. 1 suspension upper arm.
(2) Measure the dimension between the center of the front No. 1 suspension upper arm bush and the ball joint stud.
Standard length: 235.8 mm (9.283 in.)
HINT: If the dimension of the front suspension upper arm changes 2 mm (0.079 in.), the camber will change approximately 15' (0.25°
).