LS 460 V8-4.6L (1UR-FSE) (2007)
2. REMOVE LOAD SENSING VALVE SENSOR BRACKET
(a)
Remove the bolt and load sensing valve sensor bracket from the toe control link sub-assembly.
3. DISCONNECT REAR STABILIZER LINK ASSEMBLY LH
(a)
Remove the bolt and nut, and then disconnect the rear stabilizer link assembly LH from the rear No. 2 suspension arm assembly LH.
4. REMOVE REAR AXLE SHAFT LH NUT
(a)
Using SST and a hammer, release the staked part of the rear axle shaft LH nut.
SST 09930-00010
NOTICE: Release the staked part of the nut completely, otherwise the screw of the drive shaft may be damaged.
(b) While applying the brakes, remove the rear axle shaft LH nut.
5. DISCONNECT REAR DISC BRAKE CALIPER ASSEMBLY LH
(a)
Remove the 2 bolts and separate the rear disc brake caliper assembly.
NOTICE: