LS 460 V8-4.6L (1UR-FSE) (2007)
/Page-1675006.png)
^
Hang the caliper with wire or equivalent.
^
Do not damage the brake hose.
6. DISCONNECT SPEED SENSOR REAR LH
7. REMOVE REAR DISC
8. REMOVE NO. 2 PARKING BRAKE SHOE RETURN TENSION SPRING
9. REMOVE NO. 1 PARKING BRAKE SHOE RETURN TENSION SPRING
10. REMOVE PARKING BRAKE SHOE ADJUSTING SCREW SET LH
11. REMOVE NO. 1 PARKING BRAKE SHOE ASSEMBLY LH
12. REMOVE NO. 2 PARKING BRAKE SHOE ASSEMBLY LH
13. REMOVE PARKING BRAKE SHOE LEVER LH
14. DISCONNECT REAR SHOCK ABSORBER ASSEMBLY LH (for Coil suspension)
15. DISCONNECT PNEUMATIC CYLINDER WITH REAR SHOCK ABSORBER ASSEMBLY LH (for Air suspension)
16. REMOVE REAR NO. 2 SUSPENSION ARM ASSEMBLY LH
(a)
Using a plastic-faced hammer or equivalent, strike the part labeled A from the rear of the vehicle to maintain the clearance at the slide pin
area.
(b) Remove the nut, washer, bolt and No. 2 suspension arm from the axle carrier.
