LS 460 AWD V8-4.6L (1UR-FSE) (2009)
(b) With the paint mark on the hose's tip facing the bottom of the vehicle, install the No. 2 brake actuator hose to the brake accumulator pump with
the hose clip.
NOTE:
When inserting the hose, be careful that there is no excessive weight applied to the union of the brake accumulator pump (especially in the
union rotation direction).
HINT: Install the hose clip so that its claws face the rear of the vehicle.
(c) Connect the No. 2 brake actuator hose to the No. 3 brake actuator bracket with the clamp.
7. INSTALL BRAKE ACTUATOR PROTECTOR
(a) Install the protector.
8. INSTALL NO. 1 BRAKE ACTUATOR HOSE
(a) With the paint mark on the hose's tip facing the bottom of the vehicle, install the No. 1 brake actuator hose to the brake actuator with the hose
clip.
NOTE:
When inserting the hose, be careful that there is no excessive weight applied to the union of the brake actuator (especially in the union rotation
direction).
HINT: Install the hose clip so that its claws face the rear of the vehicle.
9. INSTALL NO. 5 BRAKE ACTUATOR BRACKET