LS 460 AWD V8-4.6L (1UR-FSE) (2009)
/Page-1858002.png)
(a) Install the No. 2 parking brake shoe return spring (LH side).
(b) Install the No. 2 parking brake shoe return spring (RH side).
10. INSTALL NO. 1 PARKING BRAKE SHOE RETURN TENSION SPRING
(a) Connect the parking brake cable.
(1) Apply a thin layer of high temperature grease to the area where the parking brake shoe lever contacts the parking brake anchor block.
(2) Install the parking brake shoe lever to the parking brake cable.
NOTE:
Take care to install the correct parking brake shoe lever because the direction of the pin is different between the left and right.
(3) Check that the parking brake inner cable and parking brake shoe lever are securely connected by trying to pull them apart.
