LS 460 AWD V8-4.6L (1UR-FSE) (2009)
Torque: 11 Nm (110 kgf-cm, 8 ft-lbf)
NOTE:
Do not twist the curtain shield airbag when installing it.
(b) Connect the connector.
NOTE:
When handling the airbag connector, take care not to damage the airbag wire harness.
3. INSTALL ROOF HEADLINING ASSEMBLY
(a) Refer to the procedures from "INSTALL ROOF HEADLINING ASSEMBLY" See: Body and Frame/Interior Moulding /
Trim/Headliner/Service and Repair/Roof Headlining (for Standard Body)/Installation.
4. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL
5. PERFORM INITIALIZATION
(a) Perform initialization See: Testing and Inspection/Programming and Relearning/Repair Instruction - Initialization.
NOTE:
Certain systems need to be initialized after disconnecting and reconnecting the cable from the negative (-) battery terminal.
6. CHECK SRS WARNING LIGHT
(a) Check the SRS warning light See: Testing and Inspection/Pinout Values and Diagnostic Parameters.