LS 460 AWD V8-4.6L (1UR-FSE) (2009)
(b) Remove the spacer shown in the illustration.
(c) Disconnect the connector.
NOTE:
When handling the airbag connector, take care not to damage the airbag wire harness.
(d) Remove the 8 bolts and curtain shield airbag.
Installation
SUPPLEMENTAL RESTRAINT SYSTEM: CURTAIN SHIELD AIRBAG ASSEMBLY: INSTALLATION
INSTALLATION
1. INSTALL CURTAIN SHIELD AIRBAG ASSEMBLY LH (for Standard Body)
(a) Install the curtain shield airbag with the 2 clips and 8 new bolts.
Torque: 11 Nm (110 kgf-cm, 8 ft-lbf)
NOTE:
Do not twist the curtain shield airbag when installing it.
(b) Connect the connector.
NOTE:
When handling the airbag connector, take care not to damage the airbag wire harness.
2. INSTALL CURTAIN SHIELD AIRBAG ASSEMBLY LH (for Long Body)
(a) Install the curtain shield airbag with the 2 clips and 8 new bolts.